Saltel Patch enables modifying Injection profile in a water injector well

Published on 21 novembre 2017

Saltel Patch enables modifying Injection profile in a water injector well

The context

The injector well was completed with 41/2in tubing and liner. This well was injecting in two different reservoirs. Both modelling and empirical data concluded that injection in the top reservoir pushed the gas cap to the oil producer wells, without providing meaningful pressure support. The client requested an Expandable Steel Patch to modify the injection profile.

The job objectives

Improving the injection in the lower reservoir with Saltel Patch was modelled: this would yield a 300Mbbl increase in cumulative production by 2020, decreasing gas oil rate (GOR) and improving the reservoir pressure support.

The solution

Saltel Patch enables modifying Injection profile in a water injector well

A 41/2in Saltel Reinforced Patch was selected and installed with ACTive coiled tubing.

The results

The patch was installed in 27 steps, and less than 5 hours. It was effectively drifted at 3.445in [87.5mm] during the setting process. The patch sealing efficiency stopped the injections in the top reservoir and successfully modified the injection profile, according to client’s latest data.

Partager :

This might be interesting