Saltel Industries has developed and manufactures a range of high pressure, high temperature Inflatable Packers for well pressure testing.
These high performance packers are run down-hole via tubing, drill-pipe or coiled tubing. Pressure is injected in the string and the packer inflates and seal the wellbore. The casing above the packer can then be pressure tested.
These packers can be used to pressure test the well in order to locate a leak before patch operation, or to pressure test the patch after the setting (if there is no other leak above the sealed zone).
To get access to full data sheet, fill the form below
Using an innovative design and rugged materials, Saltel Industries rapidly obtained remarkable levels of performance in terms of packer expansion ratio, temperature rating, pressure resistance and reliability.
Saltel Industries provides inflatable packers for many different applications, including:
- Formation Evaluation Inflatable Packers (More than 3000 of these Inflatable Packers have been successfully set around the word.)
- Expansion Tool Inflatable Packers (Dedicated to SES Patch expansion, these high-performance packers, are part of the Down Hole Expansion Tool, and are run downhole with our Expandable Steel Patches)
- Pressure Test Inflatable Packers (run downhole via tubing, drill-pipe or coiled tubing, pressure is injected in the string to inflate the packer against the wellbore. The packer sealing enables the pressure test.)
Saltel Industries developed and manufactures a range of high-pressure, high-temperature (HPHT) Inflatable Packers dedicated to Saltel Patch expansion.
These high-performance packers, part of the Down Hole Expansion Tool (DHET), are run downhole with an Saltel Patch via tubing, drill pipe or coiled tubing. Pressure is injected in the string and the packer expands the patch to the casing.
Various inflatable packer sizes (from 3 in. to 8.5 in. OD) allow expanding Saltel Patches from 4.5 in. up to 13-3/8 in. casings.
Saltel Industries developed and manufactures a range of high-pressure, high-temperature Inflatable Packers for formation evaluation applications. Our packers are compatible both for water and hydrocarbon base mud systems. These high-performance packers are sold to an oilfield service company on an exclusive basis.