Turn the reservoir into selective producing zones for better control
Challenge
When you need to isolate producing zones for selective EOR purposes, the annulus can be sealed and divided into selective producing areas with annular well packers.
Once installed, they will provide an effective and permanent seal, granting better control of the production area.
Solution
Saltel Industries Annular Zonal Isolation Packers (AZIP) simulate combined effects of temperature drop and differential pressure. Metallic and elastomeric material selection adapted to the well conditions allow for multiple acid treatments during the life of the well.
_ | Xpandable steel AZIP-C 0-0 | Xpandable steel AZIP-C 1-0 | Xpandable steel AZIP-C 1-1 |
---|---|---|---|
Mounting | Crimped | Crimped | Crimped |
Valve system | Safety closing valve | Lock valve closing permanently packer expansion port. Annulus compensation valve (one side) | Lock valve closing permanently packer expansion port. Dual Annulus compensation valve (both sides) |
Sealing System | Deformable corrosion-resistant alloy (CRA) sleeve with elastomer seal | Deformable corrosion-resistant alloy (CRA) sleeve with elastomer seal | Deformable corrosion-resistant alloy (CRA) sleeve with elastomer seal |
Reliability | Life of well (Sweet and Sour environment) | Life of well (Sweet and Sour environment) | Life of well (Sweet and Sour environment) |
Performance | Differential pressure hold by steel sleeve mechanical resistance Unaffected by temperature variations | Self energized High pressure differential from one direction Unaffected by temperature variations | Self energized High pressure differential from two directions Unaffected by temperature variations |
Max DeltaP Compensated | Up to 3,000 psi depending on diameter and sleeve thickness | Up to 3,000 psi depending on diameter and sleeve thickness | Up to 3,000 psi depending on diameter and sleeve thickness |
Max DeltaP Not Compensated | Up to 3,000 psi depending on diameter and sleeve thickness | Up to 3,000 psi depending on diameter and sleeve thickness | Up to 3,000 psi depending on diameter and sleeve thickness |
Max Temp. | 302 degF - 150 degC | 302 degF - 150 degC | 302 degF - 150 degC |
Qualification | API 19 OH V1 | API 19 OH V1 | API 19 OH V1 |